Knif Soma mastering equalizer
Knif Soma equalizer logo and slogan

Features

  • Four band parametric equalizer with interleaved frequency bands

  • Transformer based MS-matrix

  • +6 dB mode boosts the internal level for more character

  • 12 dB/octave low-pass and high pass filters

    • S-channel high-pass selectable 6 dB/oct for ”elliptical” bass equalizing

  • Two stage vacuum tube makeup amplifiers, with DC-coupled feedback, and amorphous core output transformers

  • Elma® rotary switches for precision and longevity

    • 5-position Shelf/Q adjustment

    • 23-position Boost/Cut

    • 16-position frequency adjustment

    • 23-position gain trim

  • State-of-the art Lundahl® input and output transformers with mu-metal shielding

  • Polypropylene capacitors throughout the filters

  • Soft touch collet knobs for optimal touch and feel 

Overview

Soma is a versatile dual-channel audio equalizer intended for audio mastering and mixing applications.

It is a clear departure from the old “passive EQs are for general shaping only” paradigm.

Soma is the only commercially available passive EQ with real Q adjustment. This steps up the usability and accuracy of the device to a whole new level, far above the products using a resistor based Q adjustment. In the traditional architecture, the Q setting affects boost/cut amount and does not offer a wide range. 

In addition to a four band parametric equalizer, there are also high-pass and low-pass filters included with an elliptic filtering capability.

The implementation of real Q adjustment and frequency selection is established by switching capacitor and inductor values via gold-plated subminiature relays (about 150 pcs in Soma). The switching is controlled by elementary CMOS logic circuits instead of a microcontroller for extended lifetime and ease of maintenance. All rotary controls in the Soma EQ are manufactured by Elma®. 

The mu-metal shielded inductors are wound in-house and all capacitors are exclusively polypropylene.

The make-up gain is produced by a two stage vacuum tube circuit coupled by a Lundahl® amorphous core output transformer introducing controlled subtle beautification of the signal.

Soma is equipped with a transformer based passive MS encoding and decoding, adding no extra components to the circuit.

Knif Soma equalizer rear

Pricing

7600 € (excluding VAT, duties, and shipping costs)

Tech specs

INPUT

Frequency

Slope

Crosstalk

1 kHz, MS off

10 kHz, MS off

-100 dB

-80 dB

8 kΩ minimum, depends on EQ setting

Impedance

+25 dBu

Maximum Level

XLR female, Neutrik, 3-pin, gold-plated

Connectors

OUTPUT

+25 dBu

Maximum Level

XLR male, Neutrik, 3-pin, gold-plated

Connectors

RANGE

Frequency

Q

Noise

A-Weighted, MS Off

A-Weighted, MS engaged

-90 dBu

-86 dBu

150 Ω (300 Ω with codec)

Impedance

27 … 470 Hz

1st Band

0.5 … 1.5 + Low Shelf

100 … 1 800 Hz

2nd Band

0.5 … 1.5 + Low Shelf

560 … 10 000 Hz

3rd Band

0.5 … 1.5 + High Shelf

1 500 … 27 000 Hz

4th Band

0.5 … 1.5 + High Shelf

Dimensions (w × l × h)

430 × 352 × 176 mm (4U)

Gain (Boost / Cut)

±8 dB

12 dB/Oct
(6 / 12 dB/Oct*)

High-Pass Filter
*Right Channel Only

25 / 33 / 50 Hz 
(140 / 200 / 280 Hz*)

12 dB/Oct

Low-Pass Filter

24 / 20 / 17 kHz

PERFORMANCE

-1 dB, Ref. 1 kHz

Frequency Response

10 … 55 kHz

1 kHz, 20 dBu

Second Harmonic Distortion

0.2 … 0.4% (typical)

MAINS

115 / 230 VAC, selectable

Mains Voltage

50 / 60 Hz

Mains Frequency

54 W

Power Consumption

GENERAL

13.8 kg

Weight

CONTENT

1 pcs

Soma Equalizer

1 set

Spare tubes and fuses

WARRANTY

2 years (for terms and conditions, refer to the Warranty section)

Plugin version

Plugin Alliance has released a plugin version of our Soma equalizer.

Visit Plugin Alliance website.